Action disabled: source

Cisco CUBE

voice class sip-profiles 1
request INVITE sdp-header Video-Attribute remove
request INVITE sdp-header Video-Media modify "m=video(.*)" ""
request INVITE sdp-header Video-Bandwidth-Info remove
request INVITE sdp-header Video-Connection-Info remove
request REINVITE sdp-header Video-Attribute remove
request REINVITE sdp-header Video-Connection-Info remove
request REINVITE sdp-header Video-Bandwidth-Info remove
request REINVITE sdp-header Video-Media modify "m=video(.*)" ""
request UPDATE sdp-header Video-Attribute remove
request UPDATE sdp-header Video-Connection-Info remove
request UPDATE sdp-header Video-Bandwidth-Info remove
request UPDATE sdp-header Video-Media modify "m=video(.*)" ""
dial-peer sort ! Sort Dialer Peers in Ascending Order
dial-peer sort descending ! Sort Dialer Peers in Descending Order

Unlike the UCCE documentation if G729 transcoding is not needed, leave out Univeral and just have g711alaw / ulaw and CPA setup as per below.

dspfarm profile 4 transcode 
     codec g711ulaw
     codec g711alaw
     maximum sessions 250
     associate application CUBE

Cisco UCCE Reference

dspfarm profile 3 transcode universal
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
codec g729br8
maximum sessions 360
associate application CUBE
voice options sip-options-keepalives 1
 transport udp

dial-peer voice xxx voip
 destination-pattern xxxx
 session protocol sipv2
 session target ipv4:
 voice-class sip options-keepalives profile 1
voice class server-group 1
 hunt-scheme {preference | round-robin}
 ipv4 preference 5

dial-peer voice 100 voip
 destination-pattern 1234
 session protocol sipv2
 codec g711ulaw
 dtmf-relay rtp-nte
 session server-group 1
voice class e164-pattern-map 300
 e164 919200200.
 e164 510100100.
 e164 408100100.

dial-peer voice 1 voip
 description Inbound DP Via Calling
 incoming **calling** e164-pattern-map 300
 codec g729r8

voice class e164-pattern-map 400
 url flash:e164-pattern-map.cfg

dial-peer voice 2 voip
 description Outbound DP Via Called
 destination e164-pattern-map 400

! example of e164-pattern-map.cfg



!Configuring the Server Group
Device(config)# voice class server-group 151
Device(config-class)# ipv4 preference 1
Device(config-class)# ipv4 preference 2
Device(config-class)# ipv4 preference 3
Device(config-class)# hunt-scheme round-robin
Device(config-class)# description It has 3 entries

!Configuring an E164 pattern map class
Device(config)# voice class e164-pattern-map 3000
Device(config-class)# e164 300
!Configuring an outbound SIP dial peer.
Device(config)# dial-peer voice 181 voip
!Associate a destination pattern map
Device(config-dial-peer)# destination e164-pattern-map 3000
Device(config-dial-peer)# session protocol sipv2
!Associate a server group with the dial peer
Device(config-dial-peer)# session server-group 151
!Associate the dial peer with a keepalive profile group
Device(config-dial-peer)# voice-class sip options-keepalive profile 171
Device(config-dial-peer)# end

!Verifying the Keepalive group configurations
Device# show voice class sip-options-keepalive 171
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies